PPM-05/16 1,6-16A Zamel - used to control the current value in the circuit with receivers

SKU: 40658 | 5903669007616

Regular price €30.83
/
Tax included.
Your order will be on its way within next 24 hours!

The priority relay PPM-05 is used to control the current value in the circuit with priority and / or non-priority receivers. After exceeding the set value of the current flowing through the measurement terminals (1, 2), the system will disconnect the non-priority receiver with the set time delay. The current threshold values ​​and the tripping delay time can be adjusted by the user. The system can protect the electrical system against overloading, but it does not replace over-current circuit breakers.

- Power terminals: L, N
- Rated supply voltage: 230 V ~
- Supply voltage tolerance: -15 ÷ +10%
- Nominal frequency: 50 / 60Hz
- Rated current consumption: 34 mA
- Test lead terminals: 1, 2
- Current threshold setting: 1.6 ÷ 16 A (his ~ 5%)
- Current measurement tolerance: ≤ 20%
- Off delay time: 0.5 ÷ 20 s
- Power supply voltage indicator: green LED
- Current threshold exceeded: red LED
- Contact relay parameters: 1NO / NC - 16 A / 250 V AC1 4000 VA
- Number of connection terminals: 7
- Cross-section of connection cables: 0.2 ÷ 2.5 mm2
- Working temperature: -20 ÷ +60 ° C
- Work position: any
- Housing mounting: TH 35 rail (according to PN-EN 60715)
- Enclosure protection degree: IP20 (PN-EN 60529)
- Protection class: II
- Overvoltage category: II
- Dimensions: single-module (17.5 mm) 90x17,5x66 mm
- Compliance with standards:
- PN-EN 60730-1
- PN-EN 60730-2-1
- PN-EN 61000-4-2,3,4,5,6,11

- Priority relay PPM-05/16 1,6-16A Zamel
- A proof of purchase

- Control of priority and non-priority devices
- Three different product versions, depending on the level of the current being measured
- Power supply voltage indicator
- Current threshold exceeded
- Smooth regulation of the off delay time setting
- Smooth regulation of the current threshold setting
- The measuring circuit is galvanically separated
- Relay output - changeover contact with a maximum load capacity of 16 A
- Mounting on the TH 35 rail