High quality brand new remote control from Maclean. The device is addressed to people who have the original remote control and would like to make a spare. It has an elegant durable housing with chrome inserts and a sliding flap.
The remote copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code frequency of 433.92 Mhz.
The remote control should be programmed in the same way as the original remote control:
Erase the memory of the remote control:
- Press and hold button A and B simultaneously - after two seconds, the LED will flash three times.
- Release button B and then quickly press and release it 3 times (button A must be pressed all the time). After a moment, the red diode will start flashing quickly.
- Release both buttons.
- The memory of the remote control has been erased (when any button is pressed, the red diode does not light up).
Copying the signal:
- In order to start copying, the previously stored button codes must be erased from the remote control (see: "Erasing the memory of the remote control").
- Bring both remotes close to each other and press the button you want to copy on them - the diode will blink slowly 3 times and after a while it will start blinking quickly, which means that the button has been copied correctly.
- Repeat the operation with the other remotes' buttons.
- Keep in mind that both remotes must be very close to each other and must have working batteries.
Restore memory:
- Press buttons A and D simultaneously - the diode will blink three times and after a while it will start blinking quickly. This means. that the memory has been correctly restored.
- Functions: copy codes, erase codes and restore codes.
- 4 built-in buttons for use
- Very fast and easy to program
- Battery: CR2032
- Packaging: string bag
- The remote copies the signal of most remote controls (for gates, controllers, alarms) with a 433.92 Mhz fixed code.
- Maclean MCE98 remote control
- Manufacturer's packaging
- Functions: copy codes, erase codes and restore codes
- 4 built-in buttons for use.
- Very fast and easy to program
- Packaging: string bag
- Pilot copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code on 433.92 Mhz
The remote copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code frequency of 433.92 Mhz.
The remote control should be programmed in the same way as the original remote control:
Erase the memory of the remote control:
- Press and hold button A and B simultaneously - after two seconds, the LED will flash three times.
- Release button B and then quickly press and release it 3 times (button A must be pressed all the time). After a moment, the red diode will start flashing quickly.
- Release both buttons.
- The memory of the remote control has been erased (when any button is pressed, the red diode does not light up).
Copying the signal:
- In order to start copying, the previously stored button codes must be erased from the remote control (see: "Erasing the memory of the remote control").
- Bring both remotes close to each other and press the button you want to copy on them - the diode will blink slowly 3 times and after a while it will start blinking quickly, which means that the button has been copied correctly.
- Repeat the operation with the other remotes' buttons.
- Keep in mind that both remotes must be very close to each other and must have working batteries.
Restore memory:
- Press buttons A and D simultaneously - the diode will blink three times and after a while it will start blinking quickly. This means. that the memory has been correctly restored.
- Functions: copy codes, erase codes and restore codes.
- 4 built-in buttons for use
- Very fast and easy to program
- Battery: CR2032
- Packaging: string bag
- The remote copies the signal of most remote controls (for gates, controllers, alarms) with a 433.92 Mhz fixed code.
- Maclean MCE98 remote control
- Manufacturer's packaging
- Functions: copy codes, erase codes and restore codes
- 4 built-in buttons for use.
- Very fast and easy to program
- Packaging: string bag
- Pilot copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code on 433.92 Mhz
