Maclean MC-623 Wall Bracket Air Conditioner Mount Holder High Quality Steel 200kg
SKU: 34239 | 5903292802268
Regular price€28.90
/
Tax included.
Quality Steel Wall Mount Bracket for air conditioning and condensing units.
Material is powder coated, hot galvanized steel which ensures high resistance to paint damage, making the bracket very longlasting.
Quality finish of the brackets allows for installation of the air conditioning units in places exposed, such as: balconies, terraces, facades of the building, but also in less exposed places such as: roofs.
Very simple and quick installation.
Maximum load: 200kg
Brackets made of high quality powder coated, galvanized steel
Solid and stable construction
Corrosion resistant
Stove lacquere painted - colour: cream
Mounting feet included
Brackets are thoroughly protected during transport
Warranty: 24 months
Maximum load: 200kg
Brackets made of high quality powder coated, galvanized steel, corrosion resistant
Solid and stable construction
Stove lacquere painted - colour: cream, Brackets are thoroughly protected during transport
Warranty: 24 months
Maclean MC-864 Floor & Roof Stand for Air Conditioner Bracket Holder max. 70kg Adjustable Height & Width Galvanized Powder Coating
SKU: 62467 | 5902211114284
Regular price€40.28
/
Tax included.
The Maclean MC-864 bracket serves as a solid and stable support for an outdoor air conditioning unit where it is not possible to mount it on the wall. Powder coating and electroplating guarantees high resistance to scratches and paint chipping, so the lifespan of the base is very long.
- Maximum load: 70 kg
- Height: 26 cm
- Width: 50 cm
- Length: 100 cm
- Galvanized steel
- Aesthetic appearance
- Stable and solid construction
- Maclean floor & roof stand for air conditioner units
- Solid and sturdy construction
- Adjustable length (280-870mm) and width (230-450mm)
- Attached both to the floor and to the air conditioner with the screws - ensures security of your device
- High-quality material: corrosion protection thanks to galvanized steel for longer life than comparable holders
- Powder-coated for protection against scratched and chipping
- Max load up to 70 kg
- Manual and mounting accessories included in the set
Maclean MC-621 Air Conditioner Condensing Unit Galvanized Steel Wall Mount Bracket up to 100kg
SKU: 34226 | 5903292802244
Regular price€19.76
/
Tax included.
Quality Steel Wall Mount Bracket for air conditioning and condensing units.
Material is powder coated, hot galvanized steel which ensures high resistance to scratches, making the bracket very longlasting.
Excellent for installation of the air conditioning units in places exposed, such as: balconies, terraces, facades of the building, but also in less exposed places such as: roofs.
Very simple and quick installation.
Holds up to 100 kg!
Bracket made of quality steel
Very stable and reliable construction
Corrosion resistant, galvanized steel.
Support feet added (4 pcs)
The set includes 2 L-shaped brackets
Eye-pleasing looks
Weight: 3.6 kg (set)
Warranty: 2 years
Holds up to 100 kg!
Very stable and reliable construction
Corrosion resistant, galvanized steel.
The set includes 2 L-shaped brackets
Support feet added (4 pcs)
Maclean MC-624 AC Air Conditioner Wall Mount Bracket 200kg Galvanised Steel
SKU: 34270 | 5903292802275
Regular price€22.87
/
Tax included.
Steel bracket of the renowned Maclean producer for fixing the outdoor unit of the air conditioner. Powder coating and galvanization guarantee high resistance to scratches and paint chipping, thanks to which the lifetime of the brackets is very long.
The aesthetics of the brackets allow for the installation of the air conditioner in exposed places, such as balconies, terraces, building facades, but also in less exposed places, such as roofs.
Very simple and quick assembly. High quality guaranteed by a reputable manufacturer.
Product includes all necessary mounting screws and fixings.
- AC Main Unit Wall Mount
- Maximum load: up to 200 kg
- Brackets made of high quality steel
- Stable and solid construction
- High resistance to corrosion - GALVANIZED STEEL
- Protected with cream-coloured varnish
- Mounting feet included (4 pcs.)
- Set includes a set of brackets
- Aesthetic appearance
- Brand new product
- Weight approx. 3.6 kg (set)
- The supports are carefully secured during transport!
Modern and Decorative Heating Solution
The infrared heating panel provides the warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that arise when the carbon fiber is heated - it has a high thermal conductivity, which allows you to reduce the power consumption and thus save on heating costs.
During operation, the heater does not heat the air itself but the objects around it, including the human body (by improving the blood circulation).
Convenient and Resistant
The main part of the radiator is made of a bending and break-resistant polymer heating film, on which a patterned graphic is applied. Everything is fastened with wooden slats. The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easier to carry.
Easy to Operate
The on / off switch allows for easy operation.
Simple construction and the lack of mechanical parts translate into durability of the device.
Technical Specification:
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Working time: continuous (regulated by thermostat)
- Outer foil safety category: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall
- Two heating levels - regulator on the cable
The Set Includes:
- Infrared heater 430W TRIO
- Holding hook
- User manual
- Manufacturer's packaging
- Innovative flexible heating panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Decorative Design
- 2 power levels - regulator on the cable
- Quick and easy installation
- Does not dry the air in the room
- Power: 430 W
LTC Portable Electric Oil Filled Radiator 2500W 11 Fins Overheating Protection Electromechanical Thermostat Efficient
SKU: 65021 | 5902270752854
Regular price€58.49
/
Tax included.
LTC LXUG11 is an incredibly efficient oil heater. It allows you to reheat a room without radiators or where the radiators are insufficient. Irreplaceable during the failure of the heating system. The heater gives you the ability to adjust the temperature and operates at 3 power levels. For safety of use, the device is equipped with protection against overheating. The model has 11 heating fins and a power of 2500W.
Portable Electric Oil Heater
- 11 heating fins
- 3 Power levels of heat settings
- Temperature control
- Power distribution: 1000W / 1500W / 2500W
- Maximum power 2500W
- Overheating protection
- Indicator light
- Electromechanical thermostat
- 4 Wheels
- Power supply: 230V - 50Hz
- Oil heater 11 ribs 2500W LTC
- Original packaging
- A proof of purchase
- Built-in thermostat - allows for temperature control
- 11 fins - ideal for warming up rooms
- 3 power levels of heat settings (1000W / 1500W / 2500W)
- Thermal protection, protects against overheating of the device, guarantees safe use
- Can be easily transported to another room thanks to comfortable handle and wheels
- Irreplaceable in rooms without central heating systems or with insufficient heating
Air Conditioner Wall Mount Galvanized Steel Bracket up to 100kg Maclean
SKU: 34236 | 5903292802251
Regular price€24.73
/
Tax included.
Steel bracket from the renowned company Maclean for fixing the outdoor unit's air conditioner. Powder painting and galvanizing guarantees high resistance to scratches and paint chips, thanks to which the lifespan of the brackets is very long.
The aesthetics of brackets allows the installation of the air conditioner in exposed places, such as balconies, terraces, building facades, but also in less exposed places such as roofs. Very simple and quick assembly.
- Maximum load: up to 100 kg
- Brackets made of high quality steel
- Stablina and solid construction
- High corrosion resistance - GALVANIZED STEEL
- Protected with a cream-colored varnish
- Mounting feet included (4 pcs)
- Included - 2 pieces of handles and guide
- Aesthetic appearance
- Brand new product
- Weight approx. 3.8 kg (set)
- 2 years warranty
- For transport, the brackets are securely secured!
Concept KV0800 Portable Air Conditioner 3in1 Dehumidifier Fan 8000 BTU Efficient with Window Hose Mount Accessories Remote Thermostat Timer Sleep Mode
SKU: 69415 | 8595631007433
Regular price€346.76
/
Tax included.
Convenient and Portable
The Concept KV1000 mobile air conditioner will provide pleasant refreshment on hot days. It is an ideal choice for apartments where there is often a problem with the installation of permanent air conditioning. Cold air enters the room, and warm air is discharged through a hose and a special window mount that's included in the set. The air conditioning is equipped with wheels, so it can be easily moved to any place. It is easy to install without the need for installation on the facade of the building, and its operation is not expensive, as evidenced by energy class A.
High performance
With a power of 8 000 BTU (2.35 kW), the KV0800 mobile air conditioner is suitable for rooms up to 22 m2. It is equipped with 2 cooling speeds and temperature control, which can be set in the range of 17-30 C. It has a self-evaporation function, which eliminates the need to pour water from the tank under optimal conditions.
3in1: Air conditioning, Dehumidifier, Fan
The KV0800 portable air conditioner offers three different modes of operation: cooling, dehumidifying and fan.
In DRY mode it effectively dries up to 24L per day. If you activate the FAN function, the room will be ventilated without additional cooling. You can choose between two speeds.
Simple operation
For operation, you can use the control panel on the body of the device or remote control. Thanks to the clear LED display and light indicators you will have control over the currently set values.
Timer
The air conditioner is equipped with a timer function that allows you to choose from delayed on and off options in the range of 1 to 24 hours. This allows you to cool the room in the house before returning from work or set automatic shutdown during sleep.
Sleep Mode
Hot nights usually worsen the quality of sleep. To properly rest at night, the air conditioning is equipped with SLEEP mode. When activated, the sleep indicator will light up and other data, including the LED display, will go out. The cooling / ventilation speed automatically drops to the lowest level.
Safe and Reliable
The air conditioner is equipped with a number of functions that ensure safe operation and at the same time extend its life. You do not have to worry about possible overheating or freezing, the device itself monitors the optimal values. If necessary, protective functions are activated. The air conditioner will also notify you when to empty the internal tank. After solving the problem, the device automatically returns to its original state.
- Cooling power: 8,000 BTU (2.35 kW)
- 2 levels of cooling performance
- Energy class A
- Air circulation: 350 m3 / h
- Room size: up to 22 m2
- ON / OFF timer: 24 hours
- SLEEP mode
- DRY mode - Dehumidifying 19 L / day
- FAN mode - free-standing fan
- Remote control
- Min./max noise level: 61 dB
- Dimensions: 36 x 34 x 82 cm
- Weight: 25 kg
- Power: 0.9 kW
- Mobile Air Conditioner 8000 BTU Concept KV0800
- Flexible hose with discharge nozzle
- Window set
- User manual
- Manufacturer's packaging
- Mobile Air Conditioner 8000 BTU Concept KV0800
- Cooling power: 8,000 BTU (2.35 kW)
- Provides pleasant refreshment on hot days
- 3in1: cooling, drying and fan
- Easy to install without having to install on the building facade
- Suitable for rooms up to 22 m2
- 2 cooling speeds
- Temperature control in the range of 17-30 ° C
- Self evaporation function
- ON / OFF timer: 24 hours
- SLEEP mode
- With wheels for easier transportation
- In set with window hose mount
Camry CR 7306High Velocity Fan 45cm 200W with Handle, Air Circulator, Efficient
SKU: 36239 | 5908256831490
Regular price€48.60
/
Tax included.
Air circulator fan 200W Camry CR 7306
A CAMRY air circulator with a very high power of 200 watts and a 45 cm propeller diameter. Integrated handle, metal cover and propeller, chrome finish.
The high-speed air circulators do not only generate the air stream, but also cause the actual air circulation in the room.
In summer, the circulators perform excellently for refrigeration purposes. They are much more efficient and cost-effective than ordinary fans. The operation of the circulators is similar to the fans, but the circulators have no task to cool or heat the air, as it seems, but cause circulation, i.e. air movement in a given room.
An efficient air circulator with a metal propeller with a diameter of 45 cm. Provides a pleasant supply of cool air. The circulator is easy to use and universal thanks to 3 speed ranges and tilt angle adjustment. Equipped with a stable base and a 200 Watt motor, it is an excellent choice for hot days.
- Diameter 45cm / 18 "
- Metal propeller
- 3 speed ranges
- Adjusting the angle of inclination
- Stable base
- 160cm cable
- Max power: 200 W
- CR 7306 45cm Camry fan
- Original packaging
- User manual PL
- A proof of purchase
Perfect for:
- Warehouse
- Store
- Workshop
- Workplace
- Kitchen
- Restaurant
- Home
- High maximum power 200W
- Stable metal construction
- Chrome finish
- Adjusting the angle of inclination of the airflow is possible in the range of 120 degrees
- The construction of the device is made entirely of high quality metal
- Control panel housing (ABS)
- Non-slip feet (rubber)
- The diameter is 45cm long
- Diameter of the shield 50cm
- 3 speeds
- 230V mains power supply
Maclean MC-863 Floor Stand Base Set for Air Conditioner Unit 100kg 45cm PVC Sturdy Set
SKU: 62466 | 5902211114277
Regular price€27.38
/
Tax included.
Maclean MC-863 bases are used to support the external air conditioning unit wherever it is not possible to mount it on the wall. The high quality of the materials used ensure many years of use.
- Load: 100 kg
- Height: 100mm
- Width: 100mm
- Length: 450mm
- High quality PVC
- Aesthetic design
- High-quality AC Main Unit floor stand base set
- Maximum load: 100kg
- Arm length: 450mm
- Made of high quality materials
- Stable and solid
- Aesthetic design
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outer film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
Infrared heater - flexible heating panel 430W TRIO pattern 10 river, dimensions 100x57cm with controller
SKU: 71122 | 5949169700527
Regular price€66.66
/
Tax included.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outer film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
FAR Infrared Heater - Flexible Heating Panel 430W TRIO Design 5 Coffee 100x57cm Decorative Heating Poster Controller on a Cord
SKU: 71121 | 5949169700473
Regular price€73.89
/
Tax included.
The radiator provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that arise when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which allows you to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but heats the objects around it and the human body (improves blood circulation in the body).
The main part of the radiator is made of a bending and breaking-resistant polymer heating film, on which a patterned graphic is applied. Everything is fastened with wooden slats.
The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easier to carry.
Additionally, the on / off switch allows for easy operation. Simple construction and the lack of mechanical parts translate into durability of the device.
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- Total length of the power cord - 150 cm
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Working time: continuous (regulated by thermostat)
- Outer foil safety category: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- The design of the heater resembles a painting
- Can be rolled up
- 2 power levels - controller on a cord
- Quick and easy installation
- Does not dry the air in the room
- Power: 430 W
Concept KV1000 Portable Mobile Air Conditioner 10000 BTU Remote Control 2.93 kW 3in1 Dehumidifier Fan with Window Mounting Set
SKU: 69416 | 8595631007440
Regular price€368.23
/
Tax included.
Convenient and Portable
The Concept KV1000 mobile air conditioner will provide pleasant refreshment on hot days. It is an ideal choice for apartments where there is often a problem with the installation of permanent air conditioning. Cold air enters the room, and warm air is discharged through a hose and a special window mount that's included in the set. The air conditioning is equipped with wheels, so it can be easily moved to any place. It is easy to install without the need for installation on the facade of the building, and its operation is not expensive, as evidenced by energy class A.
High performance
With a power of 10,000 BTU (2.93 kW), the KV1000 mobile air conditioner is suitable for rooms up to 25 m2. It is equipped with 2 cooling speeds and temperature control, which can be set in the range of 17-30 C. It has a self-evaporation function, which eliminates the need to pour water from the tank under optimal conditions.
3in1: Air conditioning, Dehumidifier , Fan
The KV1000 portable air conditioner offers three different modes of operation: cooling, dehumidifying and fan.
In DRY mode it effectively dries up to 24L per day. If you activate the FAN function, the room will be ventilated without additional cooling. You can choose between two speeds.
Simple operation
For operation, you can use the control panel on the body of the device or remote control. Thanks to the clear LED display and light indicators you will have control over the currently set values.
Timer
The air conditioner is equipped with a timer function that allows you to choose from delayed on and off options in the range of 1 to 24 hours. This allows you to cool the room in the house before returning from work or set automatic shutdown during sleep.
Sleep Mode
Hot nights usually worsen the quality of sleep. To properly rest at night, the air conditioning is equipped with SLEEP mode. When activated, the sleep indicator will light up and other data, including the LED display, will go out. The cooling / ventilation speed automatically drops to the lowest level.
Safe and Reliable
The air conditioner is equipped with a number of functions that ensure safe operation and at the same time extend its life. You do not have to worry about possible overheating or freezing, the device itself monitors the optimal values. If necessary, protective functions are activated. The air conditioner will also notify you when to empty the internal tank. After solving the problem, the device automatically returns to its original state.
Summer is Coming!
- Cooling capacity: 10,000 BTU (2.93 kW)
- 2 levels of cooling performance
- Energy class A
- Air circulation: 350 m3 / h
- Room size: up to 25 m2
- ON / OFF timer: 24 hours
- SLEEP mode
- DRY mode - dehumidification 24 l / day
- FAN mode - free-standing fan
- Remote control
- Min./max noise level: 61 dB
- Dimensions: 36 x 34 x 82 cm
- Weight: 28 kg
- Power: 1.12 kW
The set includes:
- Mobile air conditioner 10 000 BTU Concept KV1000
- Flexible hose with discharge nozzle
- Window set
- User manual
- Manufacturer's packaging
- Provides pleasant refreshment on hot days
- 3in1: air conditioner, dehumidifier and fan
- Cooling capacity: 10 000 BTU (2.93 kW)
- Easy to install without having to mount on the building facade
- Suitable for rooms up to 25 m2
- 2 cooling speeds
- Temperature control in the range of 17°C - 30°C
- Self evaporation function
- Timer
- Sleep mode
- With wheels for easier transportation
- In set with window hose mount
Teesa Cool Touch C500 Mini Water Air Conditioner Cooler, Perfect for Desk - in Office and at Home, Water Cooler Evaporative
SKU: 69169 | 5901890052450
Regular price€27.56
/
Tax included.
You can't decide what to choose - fan or air conditioner? Teesa Cool Touch C500 will dispel your doubts! The device not only cools the room, but also moisturizes and cleanses the air. Teesa Cool Touch C500 is not only the perfect mini air conditioner for the home - the device is also great in offices without air conditioning. All thanks to its small dimensions, which means that it will not take up much space on the desk.
3 speed modes
A light breeze of cooler air, or maybe a fight with strong heat? The Teesa Cool Touch C500 room air conditioner will work in every situation. The device has 3 modes of airflow speed, thanks to which you can easily adapt it to your needs.
Airflow direction adjustment
In addition to the ability to adjust the working speed, the Teesa Cool Touch C500 mini air conditioner also has vertical airflow direction adjustment. The perfect solution if you don't want the airflow to be directed directly at you.
Mini air conditioner with backlight
Teesa Cool Touch C500 portable room air conditioner has 7 colors of LED backlight. You will definitely choose a color that will make the device blend perfectly with the interior of the room in which it is currently located.
- Producer: Teesa
- Model: Cool Touch C500
- Manufacturer's number: TSA8041
- Water tank capacity: 450 ml
- Power: 8 W
- Power supply: 5 V; 2 A.
- Weight: 1 kg
- Dimensions: 190 x 180 x 170 mm
- Includes: USB cable, user manual
- Teesa Cool Touch C500 mini water air conditioner
- USB cable
- User manual
- Manufacturer's packaging
- 3 fan speed settings
- Humidification and air purification
- Cool air flow
- Vertical airflow direction adjustment
- Portable and compact
- 7 backlight colors
- Non-slip feet
Concept BV1020 electric heating shoe with 3 temperature levels
SKU: 70750 | 8595631009598
Regular price€39.13
/
Tax included.
Foot Warmer Concept BV1020 made of a pleasant fleece material with a soft plush lining offers 3 temperature levels, protection against overheating and an automatic shutdown function. The lining is removable and washable in the machine.
Perfect for winter
If you have cold feet, the Concept BV1020 electric shoe is for you. It protects the feet against cold and warms them up instantly. You will appreciate it especially on long winter evenings. Offers 3 temperature levels that can be easily changed. It does not take up much space, so you can take it with you, for example, to a cottage in the mountains.
Nice to touch
The BV1020 Foot Warmer is made of a fleece material and a soft fleece lining that is very pleasant to the touch. In addition, it is removable, so you can easily wash it in the washing machine.
Security
The shoe is equipped with protection against overheating and an automatic switch-off function that turns off the heating after 90 minutes of continuous operation.
- Manufacturer: CONCEPT
- Model: BV1020
- Materials: fleece and a removable plush lining that can be washed
- 3 degrees of heating temperature
- Safety function and automatic shutdown after 90 minutes
- Rapid heating
- Overheating protection
- Size: 30 x 30 x 24 cm
- Weight: 0.88 kg
- Power: 100 W
- Voltage: 220 - 240 V ~ 50 Hz
- Color: dark gray
- Foot Warmer is made of a pleasant fleece material with a soft plush lining
- The lining is removable and machine washable
- It protects feet from cold and warms them up instantly
- Offers 3 temperature levels that can be easily changed
- The shoe is equipped with protection against overheating
- The automatic switch-off function turns off the heating after 90 minutes of continuous operation
- Rapid heating
- Size: 30 x 30 x 24 cm
- Power: 100 W
FAR Infrared Heater - Flexible Heating Panel 430W TRIO Design 8 Wine 100x57cm Decorative Heating Poster Controller on a Cord
SKU: 70155 | 5949169700503
Regular price€61.23
/
Tax included.
The radiator provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that arise when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which allows you to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but heats the objects around it and the human body (improves blood circulation in the body).
The main part of the radiator is made of a bending and breaking-resistant polymer heating film, on which a patterned graphic is applied. Everything is fastened with wooden slats.
The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easier to carry.
Additionally, the on / off switch allows for easy operation. Simple construction and the lack of mechanical parts translate into durability of the device.
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- Total length of the power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Working time: continuous (regulated by thermostat)
- Outer foil safety category: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- The design of the heater resembles a painting
- Can be rolled up
- 2 power levels - controller on a cord
- Quick and easy installation
- Does not dry the air in the room
- Power: 430 W
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.