The product is used for automatic light control.
Using an infra-red sensor it detects movement in short distance.
Perfect for automatic light control in cabinets, closets etc

Power source: 110-240V/AC Power Frequency: 50/60Hz
Detection Distance: 5-6cm
Incandescent Bulb Rated Load: 110-130V - 300W / 220-240V - 500W
Energy Saving Bulb Rated Load: 110-130V - 100W / 220-240V - 200W

The product is used for automatic light control.
Power source: 110-240V/AC Power Frequency: 50/60Hz
Detection Distance: 5-6cm

Il prodotto è un nuovo prodotto a risparmio energetico; Adotta lo stampo per sonda a microonde con onda elettromagnetica ad alta frequenza (5,8 GHz) e circuito integrato. Riunisce automazione, comodità, sicurezza, risparmio energetico e funzioni pratiche. L'ampio campo di rilevamento dipende dai rilevatori. Funziona ricevendo il movimento umano. Quando si entra nel campo di rilevamento, può iniziare a caricarsi immediatamente e identificarsi automaticamente giorno e notte. La sua installazione è molto pratica e il suo utilizzo è molto ampio. Il rilevamento è possibile attraverso porte, finestre o pareti sottili.

Il prodotto è un nuovo prodotto a risparmio energetico; adotta lo stampo del sensore a microonde con onda elettromagnetica ad alta frequenza (5,8 GHz) e circuito integrato. Raccoglie automatismo, praticità, sicurezza, risparmio energetico e funzioni pratiche. L'ampio campo di rilevamento dipende dai rilevatori.
Funziona ricevendo il movimento umano. Quando si entra nel campo di rilevamento, è possibile avviare immediatamente il carico e identificare automaticamente giorno e notte. La sua installazione è molto comoda e il suo utilizzo è molto ampio. È possibile rilevare l'attraversamento di porte, lastre di vetro o pareti sottili.

- Tensione di alimentazione: 110-240 V / AC
- Frequenza di alimentazione: 50Hz
- Funziona con illuminazione a LED
- Campo di rilevamento (raggio): 4-10 m (<24 ° C)
- Sensore di luce: 3-2000LUX (regolabile)
- Tempo di esecuzione: min 10s ± 3s, max 12min ± 60sec
- Campo di rilevamento: 360º
- Frequenza di lavoro: 5,8 GHz
- Altezza di installazione consigliata: max: 4-15 m
- Velocità di rilevamento del movimento: 0,6 ~ 1,5 m / s
- Consumo energetico: 0,9 W.
- Trasferimento di energia: <0,2 mW
- Carica massima:
- Lampadina a incandescenza:
- 1200 W (da 220 a 240 V / CA)
- 800 W (110-130 V / CA)
- Lampadina a risparmio energetico:
- 300 W (da 220 a 240 V / CA)
- 200 W (110-130 V / CA)
- Grado di protezione: IP20
- 2 anni di garanzia

- Rilevatore di movimento a microonde a frequenza elettromagnetica MCE137
- Prova d'acquisto

- Maclean MCE137
- Distanza di rilevamento: 4-10 m (raggio)
- Sistema HF: radar CW 5.8GHz, banda ISM
- Potenza di trasmissione: <0,2 mW
- Altezza di installazione: 4-15 m
- Consumo energetico: circa 0,9 W.
- Velocità di rilevamento del movimento: 0,6-1,5 m / s

Multi-function switch concealed motion sensor equipped with an infrared detector with high sensitivity. MCE143 device allows for wide functionality that saves electricity. The product provides automatic switching load when motion is detected in the detection, thanks to the infrared sensor. With photosensitive sensor device can be set to operate only at a specific time of day.

- The motion sensor double pir, cabinets, range 8m, 1200W / 300W
- Power supply: 220-240V / 50Hz
- Detection range: 8m max (<24 ° C)
- Light Sensor: 3-2000LUX (regulation)
- Time switch: min: 10s ± 3s max.:15min±2min
- Load max .: 120W (incandescent lamps) 300W (energy saving lamps)
- Field of detection: 360 °
- Operating temperature: -20 ~ + 40 ° C
- Operating Humidity: <93% RH
- Recommended installation height: max: 2.2m ~ 4m
- Power Consumption: 0.5W
- The speed of the detected motion: 0.6 ~ 1.5m / s

- Range 8m, 1200W / 300W 
- Multi-function switch concealed motion sensor
- MCE143 device allows for wide functionality that saves electricity

The Maclean Energy LED Plafond is the best solution for your office, shop or home. It is an alternative to traditional ceiling or wall lamps. It was made of durable materials. The milky lampshade allows for uniform light distribution. The panels are environmentally friendly, they do not contain harmful substances. They perfectly fit into suspended ceilings. It is possible to mount the panel on the wall or ceiling. The source of light are SMD diodes of modern generation, which are much more durable than standard lamps.

- Light source: LED
- Power source: 110-240V / AC
- Rated load: 16W (70PCS, 1200LM)
- Energy Frequency: 50 / 60Hz
- Mounting height: wall 1.5 - 3.5m / ceiling 2-4m
- Color temperature: 4000-5000K
- Protection class: IP66
- Life time: 50000h
- Luminous flux: 1200 lumens
- Easy construction
- With mounting accessories
- Diameter: 31cm

- Luminous flux: 1200lm
- Power: 16W
- Easy to install
- Aesthetic design
- Light source: Energy-saving LEDs
- Warranty: 2 years
- IP66 protection degree

Maclean MCE151 remote control sockets 3 psc. The devices needed in today's times where the popular topic is energy saving. The purpose of the sockets with remote control is to support home appliances such as lamps, fans, other electrical equipment that we can not get to turn on or off. Set made for convenience so you can turn on and off any remote device connected to the socket, even those in the second room or behind the furniture. In addition, the sockets allow you to switch off appliances that use energy (RTV, household appliances) even during sleep. Controlled socket can be even behind the wall, the glass, the pilot does not need to see the socket.

- Power supply: 230V, 50Hz
- Maximum load: 16 (2) A, 3600W
- Frequency: 433.92MHz
- Range: about 30m in open space
- Remote control batteries: 2 AAA 1.5V (included)
- Warranty: 2 years

- Programmable remote control sockets 3pcs + remote control
- Support home appliances such as lamps, fans, other electrical equipment
- The sockets allow you to switch off appliances that use energy (RTV, household appliances) even during sleep

Presa remota esterna 1k Maclean MCE151 - Programmabile + batterie nel telecomando
Al giorno d'oggi l'attrezzatura è necessaria, il che è un tema molto popolare di risparmio energetico. Lo scopo delle prese di controllo remoto è il servizio di elettrodomestici come lampade, ventilatori, altri dispositivi elettrici che possono essere accesi o spenti. Il set è stato progettato per un maggiore comfort, in modo da poter accendere e spegnere il telecomando di ogni dispositivo collegato a una presa a muro, anche nella stanza accanto o dietro i mobili.
Inoltre, una presa che consente di spegnere il dispositivo, anche in modalità sleep, consumo energetico (elettrodomestici). La presa controllata può essere anche dietro la parete, il vetro, il pilota potrebbe non vedere il nido.
Programmazione:
Aprire il coperchio e posizionare il telecomando al centro con due batterie AAA da 1,5 V. Quindi premere il pulsante ON / OFF per vedere se funziona. Se il LED sul telecomando illumina il telecomando, le batterie sono corrette.
Collegare la presa di corrente, il LED lampeggia. Inserire la modalità di selezione del canale sul telecomando. Nota: il socket uscirà dalla modalità di selezione del canale dopo 29 secondi di inattività.
Sul telecomando, premere on-a, B-ON C-ON o D-ON per far corrispondere la presa. Dopo il collegamento riuscito, il LED smetterà di lampeggiare. Pronto - Ora è possibile accendere o spegnere l'alimentazione premendo il pulsante ON / OFF.
Cancella un canale: (la luce lampeggia nella modalità di selezione del canale) scollegare e ricollegare le prese di corrente. Quindi premere e tenere premuto il pulsante OFF finché non lampeggia (circa 3-4 secondi), il che significa che il canale selezionato è stato rimosso. Dopo aver rimosso il canale, il ricevitore ritorna alla modalità di selezione. Il tempo totale per la selezione del canale è di 29 secondi.
Rimozione del canale selezionato: Disconnettere la presa di corrente e (lentamente il LED lampeggia nel modo di selezione canale), quindi premere e tenere premuto il pulsante OFF "ALL ON / OFF" finché il LED non lampeggia velocemente (3-4 secondi) canali selezionati, ON / OFF è stato cancellato. Dopo tutto, il LED smette di lampeggiare.

- Presa telecomando interna programmabile 1 pz + telecomando + batterie nel telecomando
- Alimentazione: 230 V, 50 Hz
- Carico massimo: 16 (2), 3600W
- Frequenza: 433,92 MHz
- Portata: circa 30 metri in spazio aperto
- Batterie del telecomando: 2 AAA 1,5 V (incluse)
- Garanzia: 2 anni

- Presa telecomando interna programmabile 1 pz + telecomando + batterie nel telecomando
- Alimentazione: 230 V, 50 Hz
- Carico massimo: 16 (2), 3600W
- Portata: circa 30 metri in spazio aperto
- Batterie del telecomando: 2 AAA 1,5 V (incluse)

 
1. Open the battery cover of the transmitter and insert two AAA 1.5V batteries. Then, press any ON / OFF channel to check whether the unit is working. If the LED display of the transmitter is concerned, this means that the transmitter works.
2. Press the A, B, C, or D button of the transmitter to connect to the receiver. As soon as the connection is successful, the LED will stop flashing slowly. You can then follow the receiver Press and hold the button on the selected channel.

 
Each transmitter can control up to 4 channels (1AN, 1AUS, 2AN, 2AUS, ... etc).
Range: approx. 30 m outdoors
Battery: 2x. AAA 1.5V (not included)
Compatible with MCE151 and MCE153 radio sockets

 
Range: approx. 30 m outdoors
Battery: 2x. AAA 1.5V (not included)
Compatible with MCE151 and MCE153 radio sockets

The Maclean universal plug adapter allows You to connect any device to Your UK mains - the product is compatible i.e. with European, Italian, Asian, Taiwanese, Chinese, Thai, USA plugs.
All You need to do is to take Your device with the foreign plug and plug it into the adapter, then to the mains outlet.

Compatible with Plug Types: A, B, C, D, E, F, G, H, I, J, K, L, M, N, O

- Brand: Maclean
- Type: Travel adapter
- Input: Universal - EU, Asian, USA, etc.
- Output: GB / UK 3-Pin Plug
- Output voltage: max. AC 250V / 13A
- Colour: Black

- Universal travel adapter to 3-Pin UK Socket
- Works i.e. with European Plugs, USA Plugs, Asian Plugs
- High-Quality workmanship
- Various sets available

ADAPTER MAKES CONNECTIONS OF DEVICES WHICH HAVE THE UK / USA STANDARD PLUG TO THE EUROPEAN SOCKET
You can connect UNIVERSAL UNIVERSAL plugins to it: AMERICAN, ITALIAN, AND ASIAN / CHINA / TAJWAN / THAILAND and others, practically all over the world.

Technical Specifications:
Operating voltage: 110 ~ 250VAC
Max. Current: 13A
Warranty 2 years

Maclean Adapter Socket UK On Universal Unit Version Black
Color: Black
Operating voltage: 110 ~ 250VAC
Max. Current: 13A
Warranty 2 years

Maclean is a global leader in the market for specialized cables and home cinema accessories, hi-fi systems and PC connections. The company's position on the market has been built for over 10 years. Each product is created by a group of designers who, thanks to their knowledge and skills, can create something unusual as in the case of this device.
UNIVERSAL CAR CHARGER USB 4.8A.

Currently, when traveling by car, we use an increasing number of devices requiring energy.
Maclean MCE157 meets these expectations and presents a new model of the car charger with a total output power of 4.8A.
The product is primarily characterized by fast charging, multi-functionality, safety and modern design.
UNIVERSAL
The basic feature of our charger is its universal character. It is ideal for charging most USB devices from 12 to 24V, in addition, it allows you to charge two devices of this type simultaneously. In this way, we gain time and enjoy the free use of several devices at once.
If you connect one device via USB, the maximum intensity is 2.4A.
STRONG
The intensity of the charging current is the most important issue when choosing a car charger.
Our charger has two USB ports with a total rating of 4.8 A.
This solution allows simultaneous charging even as demanding devices as iPhone or tablet.
FAST
In addition to the standard USB port, the charger is equipped with a port with the Qualcomm Quick Charge QC 3.0 charging standard.
Using the QC3.0 standard, you can reach up to 4x faster than with a standard charger and up to 38% compared to the older QC2.0 standard.
ELEGANT
The modern elegant design fits perfectly in the dashboard of the car, and the small size increases the convenience of use.

- 2x USB QC 3.0 car charger
- Input power: DC12 ~ 24V
- Output power: USB 1: 5 V DC - 2.4 A
- Quick Charge 3.0 USB 2:
3.6V - 6.5V - 2.4A
6.5V - 9V - 2A
9V-12V - 1.5A
- Material: ABS
- 1.5m USB cable
- Smart IC - regulation of the energy consumption of connected devices

- MCE157 car charger
- USB cable
- Manufacturer's packaging
- A proof of purchase

Minimalist design and high quality materials give a simple look and ideal solution to power your devices in the car and perfectly fit into the interior of any vehicle.
Ideal for charging many USB devices from 12 to 24V, it also allows you to charge two devices simultaneously thanks to the double USB port, in this way we gain time and we can freely use many devices.

- 2xUSB QC 3.0 car charger
- Maclean Energy MCE157
- It is possible to charge 2 devices at the same time
- Quick Charge QC 3.0 quick charge connector
- Smart IC function
- USB cable included
- Input power: DC12 ~ 24V

Solar LED lamp with house number by Maclean Energy, model MCE172.
The lamp uses solar energy stored in a built-in powerful 600mAh battery. The LED ensures hours of operation and good visibility of the building number in the dark.

Together with the lamp, the set includes 3 sets of numbers from 0-9 + one set of letters from A to F. The set also includes a complete mounting kit.

- Solar panel: 2V 80mA
- Ni-Mh battery: 1.2V 600mAh
- Housing material: stainless steel
- Lighting time: 10-12 hours
- Easy and quick assembly
- High quality workmanship
- Dimensions: 18 x 3 x 20 cm
- Weight: 560g

- Eco-friendly and Saving energy Solar LED Light
- 3 sets of numbers from 0-9 + one set of letters from A to F included in the set
- Allows You to conveniently find your house or unlock the door at night
- Made of durable stainless steel construction, waterproof and heatproof, for withstanding rain,wind,snow .
- More Efficiently Charged via solar panel in daytime.
- Dusk to dawn light sensor - turns on only when it's dark outside!
- Easy Installation - Requires no wiring, install in seconds.
- Applicable to Door, Garden, Street, Porch, Pathway, Yard, Park, Square, Balcony etc.

High-quality bicycle flashlight with charger from the renowned company Maclean Energy. Simple to use, user-friendly torch. It has a very strong light source - the latest generation of LED Creed. The flashlight has a zoom function and 3 light modes: 100%, 50%, flashing. It works in tourism, both on a daily basis as well as on difficult trekking trails. The flashlight can easily be mounted on the handlebar of the bike using the attached bracket.

- Bicycle torch with charger
- Light source: 3W Cree LED
- Luminous flux: 200 Lumens
- Battery: Li-ion 3200mAh
- Zoom function
- 3 lighting modes
- Easy assembly
- High quality
- Bicycle flashlight
- Battery
- Charger
- Manufacturer's packaging
- A proof of purchase
- Warranty: 2 years

-Cree LED 3W 200 Lumens
-Rechargeable battery: Li-ion 3200mAh
-Zoom function
-3 light modes
-Easy assembly
-High quality

With the 4-socket socket, you can connect up to four normal-sized plugs at the same time. It has child safety, built-in illuminated on / off switch. Excellent in every workplace, shop and even at home.
Today's reality requires a large number of devices to be connected to the power outlets. The power strips come with the help, our strip is the ideal solution.

Protection against the insertion of fingers by our small children (PROTECT CHILDREN).
- Number of connections: 4 (with earth)
- Illuminated on / off switches
- Maximum power tax: 2300 W
- Cable length: 5 m
- Warranty: 2 years

- MCE182 plug
- Proof of purchase
- Warranty: 2 years

Protection against the insertion of fingers by our small children (PROTECT CHILDREN).
- Number of connections: 4 (with earth)
- Illuminated on / off switches

- Ideal for home or workplace use
- Constructed of high-quality materials for long-lasting durability
- Recyclable materials

- Fuse mounted
- 13AMP
- 3 PIN Rectangular plug

- High Quality
- 13Amps
- 1x 5x 10x 100x packs
- Heavy Duty

Don't buy cheap interfaces which doesn't work with almost all of the cars, doesn't support iOS and doesn't have bluetooth 4.0.
Basic difference between other interfaces:
- Bluetooth 4.0 1 (others 2.1)
- 3 LED indicators (others have 2 or none)
- Supports Android and iOS (others support only basic Android)
MCE200 Bluetooth interface is based on the newest chipset which allows to diagnose most of sensors in Your car !

MCE200 Main Features:
- read and delete fault codes in OBDII/JOBD/CAN/EOBD Standard
- freaze frames reading
- Fault code reading of codes characteristic for producer
- expected fault reading
- Monitoring most of the car motor parameters in the real time (dynamic logs)
- Measurement of engine power, acceleration, and flexibility
- Check engine deleting.
- Device pairing code: 1234

Compatible Cars List:
Alfa Romeo:147, 156, 159, 166, GT, GTV, Brera, Crosswagon, Spider, Sportwagon
Audi: A2, A3, S3, A4, S4, A6, S6, A8, S8, allroad, Cabriolet, Coupe, Q7, Quattro, RS2, RS4, RS6, TT, V8
BMW: series 1 116, 118, 120, 130, series 3 316, 318, 320, 323, 325, 328, 330, 335, series 5 518, 520, 523, 524, 525, 528, 530, 535, 540, 545, 550, series 6 630, 635, 645, 650, series 7 725, 728, 730, 732, 735, 740, 745, 750, 760, series 8 840, 850, MPower M3, M5, M6 ,Z4 M, X-series X3, X5, Z-series Z3, Z4, Z8
Citroen: Berlingo, C1, C2, C3, C4, C5, C6, C8, CX, Evasion, Jumpy, SAXO, Xantia, Xsara, Xsara Picasso
Dacia: Logan, Pick up
Fiat: Albea, Barchetta, Brava, Bravo, Coupe, Croma, Dino, Doblo, Ducato, Grande Punto, Idea, Marea, Marengo, Multipla, Palio Weekend, Palio, Panda, Punto, Scudo, Sedici, Siena, Stilo, Ulysse
Ford: Aerostar, Bronco, Cougar, Courier, Crown, Ecoline, Escape, Escort, Excursion, Expedition, Explorer, Express, F150, F250, F350, Fairlane, Falcon, Fiesta, Focus,Focus C-Max, Fusion, GT, Galaxy, Granada, Ka, Maverick, Stretka, Ka, Maverick, Mondeo, Mustang, Probe, Puma, Ranger, S-max, Thunderbird, Tourneo, Taurus, Transit,
Jaguar: Daimler, E-type, S-type, X-type, XJR, XJS, XJ, XJ6, XJ8, XJ12, XJ40, XJR, XJS, XJSC, XK, XKR
Opel: Agila, Antara, Arena, Astra, Calibra, Campo, Cavalier, Combo, Corsa, Frontera, GT, Merita, Monterey, Movano, Nova, Omega, Signum, Sintra, Speedster, Tigra, Vivaro, Vectra, Zafira
Peugeot: 106, 107, 206, 207, 306, 307, 406, 407, 605, 607, 806, 807, 1007, Boxer, Expert, J5, Partner
Porsche: 911, Boxster, Carrera GT, Cayenne, Cayman
Renault: (after 2002) Avantime, Clio, Coupe, Espace, Express, Fuego, Grand Espace, Grand Scenic, Kangoo, Laguna, Mascott, Master, Megane, Modus, Safrane, Scenic, Spider, Trafic, Twingo, Vel Satis
Rover: 75, 600, 618, 620, 623, 800, 820, 825, 827
Saab: 9-3, 9-5, 9-7X
Seat: Alhambra, Altea, Arosa, Cordoba, Ibiza, Inca, Leon, Terra, Toledo
Skoda: Fabia, Felicia, Octavia, Roomster, Superb
Smart: Crossblade, ForFour, ForTwo, Roadster
Volvo: 850, C70, Polar, S40, S60, S70, S80, S90, V40, V50, V70, V90, XC 70, XC 90
Volkswagen: Bora, Buggy, Caddy, Corrado, Eos, Fox, Golf, Iltis, Jetta, Karmann Ghia, Kafer, LT, Lupo, New Beetle, Passat, Phaeton, Polo, Sharan, T3, T4, T5, Caravelle, Multivan, Shuttle, Taro, Touareg, Touran, Vento

- iOS / Android / Windows
- ELM327
- Bluetooth 4.0
- Works with most of the mobile / PC apps
- Works with most of the cars
- It's not a cheap rubbish interface.

The product is distinguished by high sensitivity through the use of an integrated circuit. It combines automatism, convenience of use, safety, energy saving and practical functions. This device uses infrared radiation emitted by a human being as a signal to start working when someone is within detection range. It automatically detects day and night and is easy to install and use.

Thanks to our sensor, you will save on electricity bills because the lighting will only come on when you need it! Detection angle: 180 ° !!!
The sensor is used for automatic control of lighting or other electrical devices. Potentiometers for regulation: lighting time and sensitivity of light intensity. Mechanical vertical and horizontal adjustment.
Product features:
- A motion sensor, which operates by turning on and after a specified period of switching off the electric circuit when an object emitting infrared radiation is detected
- The sensor has 2 knobs: the LUX knob allows you to adjust the threshold light intensity (thanks to this property, we can adjust it to operate only from dusk to dawn) and the TIME knob, which makes it possible to adjust the hold-back time
- Easy fixing with 2 dowels (included)
- Application: automation of the process of switching the current on and off, eg switching on lighting, switching on alarm systems
- Also works with LED lighting

- Power supply: 220-240V / AC
- Detection angle: 180 °
- Power frequency: 50 / 60Hz
- Detection range: 12m max (<24 ° C)
- Light intensity: <3-2000LUX (regulation)
- Time delay: Min.10sec ± 3sec / Max.15min ± 3min
- Working temperature: -20 / + 40 ° C
- Operating humidity: <93% RH
- Power consumption: ~ 0.5W
- Max. load: 1200W (resistive load) / 300W (inductive load)
- Mounting height: 1.8-2.5m
- Speed ​​of detected motion: 0.6-1.5m / s
- Sensor dimensions (mm): 52/80/124

- Maclean Energy MCE201B modern infrared motion detector
- Mounting accessories (screws + dowels)
- User manual
- Original packaging
- A proof of purchase

The new generation - infrared sensor has high stability, nice, modern and practical appearance, wide range of working voltages, easy installation and a wide range of detection. Automatically detects day and light at night. SMT technology used, in line with European standards. It is designed for automatic lighting control in homes, gardens, hotels, offices, stairwells, corridors, basements, toilets, etc.

- The sensor works with LED lighting
- High degree of protection IP65
- The device distinguishes between day and night
- The user can adjust the operation of the device depending on the ambient light
- The device can work both during the day and at night when it is set in the "sun" position (max)
- Can also work in an environment where the light is lower than 3 LX when the device is set to the "moon" position
- Regarding the adjustment pattern, please refer to the testing scheme
- Time delay is added continuously: after receiving the second traffic signal, still during the first one, the device counts down the time from the moment of registering the second signal

A very aesthetic appearance means that the splitter fits perfectly into the appearance of every car interior.
The lighter socket splitter solves the problem of the need for electricity of several devices while traveling by car.
An integrated voltmeter in the distributor plug allows battery voltage monitoring!
Power consumption from 3 cigarette lighter chargers is 12V-24V, Power: 120W (max).
Product features:
Brand new, high-quality cigarette lighter splitter from 1 to 3 + four USB slots (1xQC) + voltmeter + Power Delivery USB-C.
An integrated voltmeter in the distributor plug allows voltage control!
The built-in switch allows you to easily turn on or only connected devices without removing the plug from the cigarette lighter.
Plug and Play plug, just plug into the car lighter socket.
The adapter increases the capabilities of our car lighter from 1 to 3 slots with four additional USB power ports.
Suitable for power supply and charging of high current electronic devices including cell phones, GPS, PDA, iPod, MP3, portable video players and various gadgets and car accessories, etc.
Designed for high current, up to 120W !!
It has a very thick cable with a length of 100cm with a solid plug for the lighter
The use of a long wire allows for any placement of the splitter.
Built-in fuse, increases the protection of your electronic devices.
The splitter has a high-class surge protector that protects the device from damage during charging.
Additional pads with adhesive tape allow the manifold to be mounted virtually anywhere in the car.
Illuminated buttons of each port, give the option of switching on or off any cigarette lighter socket separately.

- 4 USB ports for simultaneous use
- High power 10.2A - fast charging
- ON / OFF switch
- Input voltage: DC 12-24V
- PD USB Type-C: 5V / 2.4A 9V / 2A 12V / 1.5A
- USB output power: 2.4A (max 3.1A) / 2.4A
- QC 3.0 output: 3.6-6.5V / 3A, 6.5V-9V / 2A, 9V-12V / 1.5A
- Package dimensions: 21x13x5cm

- Maclean MCE218 cigarette lighter socket splitter
- Original packaging
- The proof of purchase

- Fast charging in the Qualcomm Quick Charge 3.0 standard
- Fast loading of Power Delivery 18W USB-C (eg iPhone 8 / 8Plus / X)
- Very high power up to 120W (up to 10.2 A fast charging)
- Integrated LED voltmeter
- Charging four devices at the same time
- Option of switching on / off each cigarette lighter socket separately
- Compact sizes 13x6x3cm
- Illuminated LED buttons
- ON / OFF switch on the distributor plug (on / off)
- 1 m cable (connecting DC plug with splitter)
- Two double-sided adhesives for mounting anywhere
- High quality control system protects against short circuits, overcharging, deep discharge, overheating and electromagnetic radiation

Ceiling light cover compatible with Maclean MCE22
Mounting Height: 2,2 - 4,0m
Material: Glass
Diameter: 30 cm

The milky glass shade of the ceiling luminaire together with silver handles make the luminaire visually appealing and versatile for use in various interiors.
The main purpose of the ceiling luminaire is to illuminate passageways and high traffic areas. It is also ideal for rooms where there is no light switch.
With our motion sensor ceiling light, you save electricity because the light only comes on when you need it!
It also works with LED lighting. The ceiling light is equipped with a motion sensor located in the middle at 360°.
The light source is two E27 threaded bulbs, each with a maximum output of 40 W. The set includes two 4W LED bulbs.

The sensor installed in the body of the luminaire has the ability to set the operating time and the light intensity at which it starts to detect motion.
This feature allows you to set the luminaire to operate only from dusk to dawn.
Easy mounting on the ceiling using dowels (included).

Ceiling luminaire MCE22:
- Operating voltage: 230V/50Hz
- Detection angle: 360°
- Light sensitivity setting: 3-2000LUX
- Detection area: max. 6 m x 360° (24 °C)
- Glass diffuser
- Diffuser colour: milky
- Maximum load: 2 x max. 40 W (bulb not included)
- Socket type: E27
- Sensor: 0.5 W (operating mode) / 0.1 W (standby): 30 cm
- Adjustable light duration: 10 seconds to 3 minutes
MCE283 bulbs:
- Manufacturer: Maclean
- Type: LED bulb
- Power: 4W
- Voltage: 230V
- Luminous flux: 400lm
- Light color: warm white
- Color temperature: 3000K
- Lifetime: 50000h
- Fixing: E27 thread.

- Ceiling light Maclean MCE22 with infrared sensor
- 2x E27, 4W 230V bulb Maclean MCE283 LED
- Operating Instructions
- Manufacturer's package

- Operation with LED bulbs
- Two E27 sockets (large thread)
- Built-in motion sensor automatically switches on the light
- Possibility to adjust the switch-on time and the intensity of the light at which the device switches on (dusk sensor)
- Quality workmanship
- In set with 2 x 4W LED bulbs
- Light colour: warm white.

Two lighting modes
The lamp was equipped with front and rear LED lighting. You decide which one you use! The front lighting has 5 SMD LEDs with 50 lumens brightness, the backlight is 6 SMD LEDs with a brightness of 60 lumens.
The mini LED battery lamp provides a gentle light
Thanks to the built-in motion sensor, the lamp does not light up all the time, only lights up for about 30 seconds when it detects motion in the vicinity (in AUTO mode).
Sensor light - it lights up automatically when it detects movement in its surroundings
This small lamp will provide a sense of security in every room!
A lamp with LED light is an extremely energy-saving solution - it consumes a minimal amount of energy, and the LEDs used ensure several years of work without the need to replace it.
Perfect for living rooms, corridors, bedrooms, children's rooms, kitchens, bathrooms and other rooms
Rotating magnetic base 360 ​​°
The powerful 360 ° magnetic holder attached to the lamp allows you to adjust the position of the lamp. Additionally, it allows you to disconnect the light at any time and use it in another place, it is a very practical solution.
The light has also a dusk to dawn motion detector - in auto mode, the lamp automatically lights up when it detects a movement only at night time

.

- LED lamp with PIR sensor
- Front 5xLED + 6xLED backlight
- Batteries: 3xAAA (not included)
- ON-AUTO-OFF switch
- 360 ° rotatable magnetic base
- Working time after motion detection: 30 seconds
- Front lighting 5 SMD LED 50 lumens
- Backlight 6 SMD LED 60 lumens
- Dimensions with a handle: 90x55 mm
- White color
- Night Time Motion Detector

- LED lamp with motion sensor, backlight Maclean Energy MCE223
- Magnetic holder
- Mounting kit (two screws, dowels, mounting tape)
- Original packaging
- The proof of purchase

.

- Wireless lamp with motion sensor, battery operated
- Very low energy consumption
- Front or rear lighting of the lamp! Such a function only in our model!
- 11 LEDs that emit light allowing for several years of continuous operation
- The lamp lights up automatically when it detects movement (in AUTO mode)
- Burning time: about 30 seconds
- Light with eye-catching intensity and color
- Sensor's angle of view: 120 degrees
- Magnetic holder and mounting screws included
- Easy to assemble and use
- Extremely practical
3 work modes:
- ON - continuous
- AUTO - PIR sensor
- OFF - turned off
- Night Time Motion Detector

Ideale da usare ovunque:
Ciabatta per un facile posizionamento di spine angolari, alimentatori, timer, ecc. È possibile collegare facilmente dispositivi elettrici alla ciabatta. Le prese sono disposte ad un angolo di 45 gradi per un facile accesso.
Con interruttore on / off:
Molte apparecchiature elettriche hanno un consumo energetico non necessario in modalità standby. La commutazione attiva o disattiva tutti i dispositivi collegati alla multipresa.
Adatto anche per il montaggio a parete:
Con la staffa integrata, puoi semplicemente montare la ciabatta sulla parete o sotto la scrivania. Pratico e salvaspazio.

Con interruttore on / off.
È adatto anche per il montaggio a parete.
Dispositivo pratico che consente di risparmiare spazio.

Molti apparecchi elettrici consumano troppa energia non necessaria in modalità standby.
Il pulsante on / off attiva o disattiva tutti i dispositivi collegati alla presa multipla. Inoltre, la morsettiera può essere montata a parete o sotto la scrivania.

Dati tecnici:
- Ciabatta a 5 vie
- Lunghezza del cavo: 1,4m
- sistemato con un angolo di 45 °
- Carico massimo collegato: 3500W
- Interruttore on / off
- Protezione per i bambini
- Colore: nero

Ciabatta di alta qualità per collegare fino a cinque dispositivi elettrici
5 colpi per la regolazione dell'angolazione di 45 ° per un accesso più facile
Adatto per l'uso universale con interruttore illuminato e protezione integrata per bambini.
Ideale per l'uso in ufficio, soggiorno o studio.
Supporto integrato per il montaggio a parete.
Carico massimo collegato: 3500W

- Ciabatta di alta qualità per collegare fino a cinque dispositivi elettrici
- 5 prese disposte ad angolo di 45 ° - per un facile accesso
- Adatto per l'uso universale
- Con interruttore illuminato e protezione bambini integrata
- Ideale per l'uso in ufficio, soggiorno o studio
- Staffa integrata per il montaggio a parete
- Carico massimo collegato: 3500W