FAR Infrared Heater - Flexible Heating Panel 430W TRIO Design 5 Coffee 100x57cm Decorative Heating Poster Controller on a Cord
SKU: 71121 | 5949169700473
Prezzo regolare€78.33
/
Imposta inclusa.
The radiator provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that arise when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which allows you to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but heats the objects around it and the human body (improves blood circulation in the body).
The main part of the radiator is made of a bending and breaking-resistant polymer heating film, on which a patterned graphic is applied. Everything is fastened with wooden slats.
The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easier to carry.
Additionally, the on / off switch allows for easy operation. Simple construction and the lack of mechanical parts translate into durability of the device.
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- Total length of the power cord - 150 cm
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Working time: continuous (regulated by thermostat)
- Outer foil safety category: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- The design of the heater resembles a painting
- Can be rolled up
- 2 power levels - controller on a cord
- Quick and easy installation
- Does not dry the air in the room
- Power: 430 W
FAR Infrared Heater - Flexible Heating Panel 430W TRIO Design 6 Coral Reef 100x57cm Decorative Heating Poster Controller on a Cord
SKU: 70153 | 5949169700480
Prezzo regolare€64.75
/
Imposta inclusa.
The radiator provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that arise when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which allows you to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but heats the objects around it and the human body (improves blood circulation in the body).
The main part of the radiator is made of a bending and breaking-resistant polymer heating film, on which a patterned graphic is applied. Everything is fastened with wooden slats.
The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easier to carry.
Additionally, the on / off switch allows for easy operation. Simple construction and the lack of mechanical parts translate into durability of the device.
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- Total length of the power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Working time: continuous (regulated by thermostat)
- Outer foil safety category: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- The design of the heater resembles a painting
- Can be rolled up
- 2 power levels - controller on a cord
- Quick and easy installation
- Does not dry the air in the room
- Power: 430 W
FAR Infrared Heater - Flexible Heating Panel 430W TRIO Design 8 Wine 100x57cm Decorative Heating Poster Controller on a Cord
SKU: 70155 | 5949169700503
Prezzo regolare€64.83
/
Imposta inclusa.
The radiator provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that arise when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which allows you to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but heats the objects around it and the human body (improves blood circulation in the body).
The main part of the radiator is made of a bending and breaking-resistant polymer heating film, on which a patterned graphic is applied. Everything is fastened with wooden slats.
The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easier to carry.
Additionally, the on / off switch allows for easy operation. Simple construction and the lack of mechanical parts translate into durability of the device.
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- Total length of the power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Working time: continuous (regulated by thermostat)
- Outer foil safety category: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- The design of the heater resembles a painting
- Can be rolled up
- 2 power levels - controller on a cord
- Quick and easy installation
- Does not dry the air in the room
- Power: 430 W
Modern and Decorative Heating Solution
The infrared heating panel provides the warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that arise when the carbon fiber is heated - it has a high thermal conductivity, which allows you to reduce the power consumption and thus save on heating costs.
During operation, the heater does not heat the air itself but the objects around it, including the human body (by improving the blood circulation).
Convenient and Resistant
The main part of the radiator is made of a bending and break-resistant polymer heating film, on which a patterned graphic is applied. Everything is fastened with wooden slats. The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easier to carry.
Easy to Operate
The on / off switch allows for easy operation.
Simple construction and the lack of mechanical parts translate into durability of the device.
Technical Specification:
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Working time: continuous (regulated by thermostat)
- Outer foil safety category: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall
- Two heating levels - regulator on the cable
The Set Includes:
- Infrared heater 430W TRIO
- Holding hook
- User manual
- Manufacturer's packaging
- Innovative flexible heating panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Decorative Design
- 2 power levels - regulator on the cable
- Quick and easy installation
- Does not dry the air in the room
- Power: 430 W
Infrared heater - flexible heating panel 430W TRIO pattern 10 river, dimensions 100x57cm with controller
SKU: 71122 | 5949169700527
Prezzo regolare€65.13
/
Imposta inclusa.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outer film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
Infrared heater - flexible heating panel 430W TRIO pattern 13 village, dimensions 100x57cm with controller
SKU: 71123 | 5949169700558
Prezzo regolare€63.73
/
Imposta inclusa.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of the outer film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outer film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves created when the carbon fiber is heated. The carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. When the heater is in operation, it does not heat the air itself, but heats surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend and break resistant polymer thermal film, on which a graphic with a pattern is applied. The whole thing is fastened together with wooden ribs.
The design of the heater allows it to be rolled up, which, combined with its low weight, makes it easy to carry.
In addition, an on/off switch on the cable allows for easy operation and selection of the power level.
A simple construction and the absence of mechanical parts lead to a long-lasting device.
- Total area of the heating element: 0.56 m2
- Mains voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cable
- Recommended heated area: 10-12 m²
- Nominal power consumption: 1.8 A
- Maximum surface temperature: 75C
- Time required to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable with thermostat)
- Safety class of external film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel with infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- The design of the heater resembles a painting
- Can be rolled up
- 2 power levels - control on cable
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outer film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cord
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.