Maclean PIR motion sensor, infrared, IP65, max 2000W, MCE243 GR, 2 pieces

The MCE243 sensor is ideal for use in the garden, around the house or terrace, at the gate, passageways, corridors, basements, warehouses, garages and other places that require lighting or other devices to be turned on when motion is detected.
The IP65 degree of protection provides resistance against water spray falling at any angle, from all sides. The sensor has high sensitivity and a very good level of workmanship. The main features are automaticity, energy efficiency and built-in practical functions.
The sensor identifies day and night (twilight sensor), turns on and off depending on the appearance of an object in the detection field. The device can operate both at night and during the day.

The main purpose of the presented sensor is the automatic control of lighting, but it is also possible to connect to it other electrical devices (such as electric heating, air conditioning, etc.), provided that the power receiver does not load the switch with a power greater than 2000 W (resistive load) or 1000 W (inductive load).
Viverse application, to control the lighting of a variety of objects:
- facades of residential buildings, courtyards, entrances, gates, garden greenery
- parking lots - exterior walls of buildings and other architectural objects
- billboards and advertising billboards, storefronts
- many other objects, including interiors

- Manufacturer: Maclean
- Model: MCE243 GR
- Number of sensors: 2
- Color: gray
- Power supply: 220-240 V/AC
- Detection area: 360°
- Frequency: 50-60 Hz
- Operating temperature: -20 to +40°C
- Light sensor: <3-2000 LUX
- Humidity: <93% RH
- Time delay: min. 10 sec. +/- 3 sec./max. 30 min +/- 2 min
- Installation height: 2.2 m-6 m
- Motion detection speed: 0.6-1.5 m/s
- Load max. 2000 W (for incandescent bulbs) / 1000 W (for energy-saving bulbs)
- Detection distance: max. 20 m (<24°C)

- Infrared motion sensor IP65 max 2000W Maclean Energy MCE243 - 2 pieces
- Mounting accessories
- User manual
- Manufacturer's packaging

The TIME knob is used to adjust the lighting time (from about 10 sec to 30 minutes).
The LUX knob is used to set the ambient light sensitivity (range from 3 to 2000 LUX). When the ambient light is insufficient and you want the device to work both day and night, set the knob to the day position (sun icon).

- High degree of protection IP65
- Wide detection range of 360°
- PIR infrared sensor
- Maximum power: 2000 W (resistive load)
- Works with LED lighting
- Built-in light intensity sensor
- Possibility to adjust the time of illumination and the level of light intensity at which the device starts working (dusk sensor)
- Detection distance up to 20 meters!
- Color: gray
- Number of sensors in the set: 2